Teleco TVPL4868AC4 Handbuch Seite 11

2.2
Radio codes deletion
TYPE OF DELETION
SINGLE RADIO CODE
Press P1, P2, P3 or P4 (**) 5 times and hold. The buzzer emits an intermittent sound. Press the button of the transmitter relative to the code to be deleted within
10 seconds. Successful deletion is indicated by a continuous sound of the buzzer.
ALL THE RADIO CODES
Press P1, P2, P3 or P4 6 times and the sixth time hold for 10 seconds. The buzzer emits a fast intermittent sound. Release when the sound becomes continuous.
* The buzzer will make a beep each time the button is pressed. There must be no more than 1 second between pressing the buttons.
2.3
1.1
Remote memorization of further radio codes
Note: P3 button is located inside the transmitter. The added radio code will have the same functions of
the code used for the memorization. This procedure is compatible with any type of transmitter.
Memorized Memorized
P3
continuous
sound
< 5 s
Press the button P3 of the memorized transmitter. The buzzer emits a
continuous sound. Press the button relative to a memorized code. The sound
stops for 1 second then it starts again. Press the button relative to the new
code. The memorization is indicated by an intermittent sound of the buzzer.
* The buzzer will make a beep each time the button is pressed.
P1..P4 **
*
5x
*
6x
New
continuous
sound
1 s < 5 s
** According to the motor to be associated
...
hold
Press the button of the transmitter
relative to the code to delete
intermittent
(10 s)
sound
2.4
Remote deletion of a radio code
Note: P3 button is located inside the transmitter.
Memorized
...
P3
3x
Press 3 times the button P3 of the memorized transmitter. The buzzer emits a
slow intermittent sound. Press the button relative to the code to delete within
5 seconds. The buzzer will stop sounding.
11
...
To delete
...
intermittent
sound
< 5 s
P1..P4
continuous
sound
continuous
sound