Inhaltsverzeichnis
Werbung
Hardware /
/
Steps
Step 1. Ins
1-1. Pull up the lever away from the
socket. Align the CPU cut edge with the
indented edge of the CPU socket.
Gently place the CPU into correct
posi
Apply an even layer of thermal
grease on the surface of CPU.
Step 2. /
2-1. Unfasten the latches on each side
of the DIMM slots.
Step 3. Ins
3-1. Replace the back I/O plate of the
case with the I/O shield provided in
motherboard's package.
Step 4. /
Remove the metal located on the slot and then insert the expansion card into the
slot. Press the card rmly to make sure it is fully inserted into its slot. And then
return the screw back to its
Guide
f the CPU and CPU C
1-2.
of CPU fan to the motherboard through
holes to install CPU fan into place.
f Mem ry M
es:
2-2. Firmly press the DIMM down un
seats correctly. Make sure the slot
latches are levered upwards and latch
on the edge of the DIMM.
f M
er
rd:
3-2. Place the motherboard within the
case by
Secure the motherboard to the case
with screws.
an
card:
.
er:
Rotate and press down the fastener
it into the I/O plate.
it
7
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
