Before You Begin; Safety Information; Recommended Tool - Dell PowerVault 130T Installationsleitfaden

1-2 Dell PowerVault 130T Storage System Rack Kit Installation Guide
Downloaded from www.Manualslib.com
adjustable mounting rails (1 pair)
10-32 x 0.5-inch counter-sink
Phillips-head screw (8)
Figure 1-1. PowerVault 130T System Rack Kit Contents

Before You Begin

Before you install your PowerVault 130T system in the rack, read the safety informa-
tion and tool requirement in the following subsections.

Safety Information

This PowerVault 130T system rack kit is intended to be installed in a Dell rack by
trained service technicians. If you install the kit in any other rack, be sure that the rack
meets the specifications of the Dell rack.
WARNING: Dell server systems are components for use in Dell racks with
the Dell customer PowerVault 130T system rack kit. The final installation of
Dell servers and PowerVault 130T system rack kits in any other brand of
rack has not been approved by any safety agencies. It is the customer's
responsibility to have the final combination of Dell servers and
PowerVault 130T system rack kits for use in other brands of racks
evaluated for suitability by a certified safety agency.

Recommended Tool

To install the PowerVault 130T system rack kit, use a #2 Phillips-head screwdriver.
manuals search engine
cage-nut tool (1)
10-32 x 0.5-inch flanged
Phillips-head screw (4)
10-32 cage nut (4)
#10 formed-metal
washer (8)