Saeco S-CLASS Incanto sirius Bedienungsanleitung Seite 44

PROGRAMMING MACHINE FUNCTIONS
44
This is a factory-set function that automatically
switches the machine into "Standby" when 3 hours
have elapsed since a coffee was dispensed.
The function is disabled when the "CLOCK"
function is on.
The switch-off time can be adjusted, in 15-minute
intervals, to a minimum of 15 minutes.
This function is used to rinse all the coffee-
dispensing parts with water.
The rinsing cycle cannot be interrupted.
A person must be present during this operation.
Warning: a large quantity of water may be discharged
from the coffee brew unit. Before starting, empty out
the drip tray and keep an additional container handy.
This function is used to carry out an automatic
descaling cycle. See Page 34.
A person must be present during this operation.
Downloaded from www.Manualslib.com
TIME SETTINGS
Select the MENU.
CLEANING
Select the MENU.
CLEANING
Select the MENU.
manuals search engine
TIMER
TIME SETTINGS
CLOCK
3:00
ON/OFF TIME
TIMER
When the function ap- Use the buttons to
pears, select it using the adjust the timer setting.
"OK" button.
CLEANING CYCLE
CLEANING
YES
CLEANING CYCLE
NO
DESCALING CYCLE
When the function ap- Choose whether to
pears, select it using enable or disable the
the "OK" button. rinsing cycle.
DESCALING CYCLE
CLEANING
YES
CLEANING CYCLE
NO
DESCALING CYCLE
When the function ap- Choose whether to
pears, select it using the enable or disable the
"OK" button. descaling cycle.
TIMER
1:15
Press the "OK" button to
confi rm your choice.
CLEANING CYCLE
YES
NO
Press the "OK" button
to confi rm your choice.
DESCALING CYCLE
YES
NO
Press the "OK" button to
confi rm your choice.