Saeco S-CLASS Incanto sirius Bedienungsanleitung Seite 39

The hardness of tap water may vary depending on
the region. For this reason, the appliance can be
set according to the water hardness in the place
where it is to be used, expressed on a scale of 1
to 4. The appliance is factory set on a hardness
value of 3.
The setting should be adjusted according to the
level of water hardness in the local area.
This function must be activated when the "Aqua
Prima" cartridge fi lter is installed for the fi rst time.
The "RESET" command must be activated every
time a new cartridge fi lter is installed.
This function enables optimal management of the
"Aqua Prima" fi lter as it warns the user when the
fi lter needs replacing.
This function allows the user to adjust the display
contrast according to personal need.
Downloaded from www.Manualslib.com
Dip the strip in water for
1 second.
Check how many squa-
res change colour.
SETTINGS
Select the MENU.
SETTINGS
Select the MENU.
manuals search engine
PROGRAMMING MACHINE FUNCTIONS
WATER HARDNESS
SETTINGS
RINSING
1 2 3
LANGUAGE
WATER HARDNESS
When the function ap- Select the corresponding hardness
pears, select it using the (e.g. 2 squares = Hardness 2) and memorize the
"OK" button. value by pressing the "OK" button.
WATER FILTER
SETTINGS
ON
LANGUAGE
OFF
WATER HARDNESS
RESET
WATER FILTER
When the function ap- From the menu it is
pears, select it using possible to set the
the "OK" button. function to ON.
CONTRAST
SETTINGS
WATER HARDNESS 0
WATER FILTER
CONTRAST
When the function ap- From the menu it is
pears, select it using possible to set the
the "OK" button. desired contrast.
WATER HARDNESS
4 1 2 3 4
WATER FILTER
ON
OFF
RESET
Press the "OK" button to
confi rm your choice.
CONTRAST
2
Press the "OK" button to
confi rm your choice.
39