Troubleshooting - Fakir VITA Benutzerhandbuch

EN

Troubleshooting

Your appliance is processed via Quality Control against any malfunction.
Fault
HEPA Filter does not
remove the dust and
odour completely
Plasma filter
not remove the dust
and odour in the room
completely
Appliance does
operate
NOTE!
If plasma filter or front cover is not installed properly, the appliance will not operate.
Possible Cause
Filter is heavily dirty and filled with
dust
Electric current wires inside the
does filter are dirty
Broken electric current wires or
open circuit
Appliance is unplugged
not
After cleaning
not assembled properly
Solution
Replace with a new filter
Clean the filter
For a new filter, contact
nearest
Service
Plug in the appliance
Make sure filters and front
cover
the appliance is
of the appliance is installed
properly.
30
Fakir Authorized