Connecting Peripheral Equipment; Video Recorder - Philips 20PF5320F01 Bedienungsanleitung

Connecting peripheral equipment

The television has 1 external socket situated at the back of the set (EXT1) and sockets on the side.
Press the
equipment connected to
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
The side connections has audio inputs, CVBS/S-VHS inputs, headphone out.

Video recorder

12
Downloaded from www.Manualslib.com
key on the remote control to display
AV
EXT1, AV/SVHS, PC, HD
FM ANT EXT 1
FM ANT EXT 1 DVI-I In
manuals search engine
and select
Source List
or .
Radio
DVI-I In
Carry out the connections shown opposite, using a good quality
euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 6).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
or peripheral
TV
Headphone
Audio In
Video In
S-Video
DVI Audio In
key.
0