Connecting; Connecting Peripheral Equipment; Other Equipment - Philips 17 pf 8946 Bedienungsanleitung

Connecting

Connecting peripheral equipment

Video recorder
:
FM ANT
VCR

Other equipment

:
FM ANT
4
FM ANT.
L
R
:
EXT. 1
VGA Input
VGA Input
EXT. 1
• Insert the radio aerial lead supplied into
the FM ANT socket located at the
bottom of the TV.
• Use the aerial connection lead supplied
:
and connect the socket situated at
the bottom of the TV to your aerial
socket.
If you are using an indoor aerial, reception
may be difficult in certain conditions.You can
improve reception by rotating the aerial. If
the reception remains poor, you will need to
use an external aerial.
• Connect the power lead to the television
and the mains plug into the wall socket
(220-240 V/50 Hz).
Video recorder (or DVD recorder)
Carry out the connections shown
opposite, using a good quality
euroconnector cable.
If your video recorder does not have a
euroconnector socket, the only connection
possible is via the aerial cable.You will
therefore need to tune in your video recorder's
test signal and assign it programme number 0
(refer to manual store, p. 7).To reproduce the
video recorder picture, press
Video recorder with decoder
Connect the decoder to the second
euroconnector socket of the video
recorder.You will then be able to record
scrambled transmissions.
Satellite receiver, decoder, DVD,
games, etc.
Make the connections as shown opposite.
0
.