Connecting Peripheral Equipment; Video Recorder; Other Equipment; Side Connections - Philips 15PF7835 Bedienungsanleitung

Connecting peripheral equipment

The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.

Video recorder

EXT1
:
FM ANT
VCR

Other equipment

EXT1

Side connections

*
S
Video
Video
in
L
Audio
in
R
7 8 9
0 Á
Ø
Video recorder (or DVD recorder)
Carry out the connections shown opposite, using a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder's test signal and assign it
programme number 0 (refer to manual store, p. 7).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
Satellite receiver, decoder, DVD, games, etc.
Make the connections as shown opposite.
Make the connections as shown opposite.With the
select or
EXT2 S-VHS2
For a monophonic device, connect the audio signal to the AUDIO L
input.The sound automatically comes out of the left and right
speakers of the set.
Headphones
When headphones are connected, the sound on the TV set will
@ #
be cut.The P
The headphone impedance must be between 32 and 600 Ohms.

To select connected equipment

n
Press the key to select
signals from the EXT2 socket).
Most equipment (decoder, video recorder) carries out the switching itself.
0
(S-VHS signals from the EXT2 socket).
keys are used to adjust the volume level.
and and
EXT1 EXT2 S-VHS2
.
n
key,
(S-VHS
11