Connecting Peripheral Equipment; Video Recorder - Philips 32PF5320 Bedienungsanleitung

Connecting peripheral equipment

The television has 2 external sockets situated at the back of the set (EXT1 and EXT2) and sockets on
the side. Press the key on the remote control to display
AV
equipment connected to
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
The EXT2 socket has audio, CVBS/S-VHS inputs and audio, CVBS outputs.
The side connections has audio inputs, CVBS/S-VHS inputs, headphone out.
DVI
DVI In Audio In

Video recorder

12
EXT1, EXT2/SVHS2, AV/SVHS3, PC
EXT 2 EXT 1
Carry out the connections shown opposite, using a good quality
euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 6).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
and select TV or peripheral
Source List
or .
HD
0
Headphone
Audio In
Video In
S-Video
key.