Connecting The Speaker Terminals - Pioneer PRS-D5000SPL Bedienungsanleitung

Connecting the Speaker Terminals

1. Expose the end of the speaker wires
using nippers or a cutter by about
15–20 mm and twist.
2. Connect the speaker wires to the
speaker terminals.
• Before connecting the wires to the terminals,
remove the endcap. After connecting the
wires to the terminals, attach the endcap.
• Fix the speaker wires securely with the termi-
nal screws.
Terminal screw
Speaker terminal
Downloaded from www.Manualslib.com
15–20 mm
Endcap
Speaker wire
manuals search engine
3. Put the wire ties in the slits and
wrap the wire ties around the wires.
• Wrap the wire tie around the wire insulation,
not the stripped wire.
Twist
Wire tie
Slit
8