Tally Dascom MIP480 Benutzerhandbuch Seite 102

Command Sets
H s , L f, S m : Size parameters
H s, L s, S m Size parameters
The size parameters (Hs, Ls and Sm) specify the pitch as follows.
These size parameters are valid when font ID (Hf, Lf) is not valid.
Null data is ignored.
Dec(Hs,Ls)
0,0 - 0,65
0,66 - 0,77
0,78 - 0,89
0,90 - 0,107
0,108 - 0,131
0,132 - 0,155
0,156 - 0,179
0,180 - 0,215
0,216 - 0,254
0,255 – 256, 256
Note: The Hs and Ls Parameters are effective only when hexadecimal 01 (decimal = 1) is specified
in the Size Modifier parameter (Sm) and Hf Lf is not found.
Sizemod (Sm) : The binary number that is the size modifier. The valid sizes are:
・
00 -No change
・
01 - Size measures the width in 0.018 mm (1/1440 in.)
・ 02, 03 - The font is proportional.
・
All other values are regarded as 0.
H c , L c : Code page ID
H c, L c Code page ID
C-8
Hex (Hs,Ls)
0000 - 0041
0042 - 004D
004E - 0059
005A - 006B
006C - 0083
0084 - 009B
009C-00B3
00B4-00D7
00D8 - 00FE
0100-FFFF
HC LC(Hex)
01H B5H
03H 52H
03H 53H
03H 54H
03H 57H
59H
03H
03H 5AH
03H 5CH
03H 5EH
03H 5FH
03H 60H
03H 61H
03H 62H
03H 65H
03H 98H
03H 9BH
28H C5H
2AH 65H
2AH 72H
Description
24 CPI Subscript
20 CPI Subscript
17 CPI Normal
15 CPI Normal
12 CPI Normal
10 CPI Normal
8.5 CPI(17 CPI double-wide)
7.5 CPI(15 CPI double-wide)
6 CPI (12 CPI double-wide, double-
hight)
5 CPI (10 CPI double-wide, double-
high)
Code Page
437
850
851
852
855
857
858
860
862
863
864
865
866
869
920
923
437G
853
USSR GOST