Product Characteristics - Crivit 306771 Gebrauchsanleitung

Product Characteristics

ECE-R 22.05 Homologation
This helmet is in compliance
with ECE-R 22 .05 standards
and is homologised accord-
ingly . The ECE-R 22 .05
standard consists of uniform
conditions for the approval of
protective helmets and its visors for drivers and
passengers of motorcycles and mopeds . The
basic principles for these tests are the so called
ECE-Regulations of the Economic Commission for
Europe .
Significant Tests of the
ECE-Regulation 22.05
• Shock absorbance
• Dynamic test of wear features
• Field of vision test
• Design strength
• Sustainability test (Strip-off test)
• Chin straps and lock test
• Shear test for outside edges
• Friction performance test of the outer shell
• Visor test
(mechanical and visual characteristics)
Inside Padding with
Coolmax Inserts
®
Coolmax
high-performance fabric fibre
that supports its wearers during sport activities .
Based on the patented DuPont-fibre technology,
Coolmax transports moisture from the body to
®
the fabric surface where it dries quicker than with
any other fabric .
The specially developed fibres of INVISTA that
are used for Coolmax
®
ture away from the body to the surface of the
fabric where it has the opportunity to evaporate
quickly . At the same time, the uniquely formed
fibres offer maximum breathing activity, even in
wet conditions . In addition, the breathing activity
improves the heat regulating effect .
Ear and forehead pads on this product are
equipped with Coolmax
by INVISTA is a
®
-fabrics transport the mois-
.
®
HeiQ Fresh Tech
®
Textile freshness
Experience the feeling of last-
ing freshness through the power of silver, keeping
you odour-free all day long .
The helmet liner contains a biocide agent (HeiQ
Fresh Tech) for an anti-bacterial, odour-inhibiting
lining treatment . Active ingredient: silver ad-
sorbed to silicon dioxide (nano) .
High-strength
HCM outer shell
High Density Copolymer Ma-
trix: High quality ABS plastic
is formed under extreme heat
and pressure to make a robust
and impact-resistant outer shell .
Visor with
anti-scratch coating
Suitable for
eyeglass wearers
Safety lock closure
Date of manufacture
(month/year):
®
11/2018
GB 23