Product Characteristics - Crivit IAN 292218 Bedienungsanleitung

Product Characteristics

ECE-R 22.05 Homologation
This helmet is in compliance
with ECE-R 22.05 standards
and is homologised according-
ly. The ECE-R 22.05 standard
consists of uniform conditions
for the approval of protective
helmets and its visors for drivers and passengers
of motorcycles and mopeds. The basic principles
for these tests are the so called ECE-Regulations
of the Economic Commission for Europe.
Significant Tests of the
ECE-Regulation 22.05
• Shock absorbance
• Dynamic test of wear features
• Field of vision test
• Design strength
• Sustainability test (Strip-off test)
• Chin straps and lock test
• Shear test for outside edges
• Friction performance test of the outer shell
• Visor test
(mechanical and visual characteristics)
Inside Padding with
Coolmax Inserts
®
Coolmax
high-performance fabric fibre
that supports its wearers during sport activities.
Based on the patented DuPont-fibre technology,
Coolmax transports moisture from the body to
®
the fabric surface where it dries quicker than with
any other fabric.
The specially developed fibres of INVISTA that
are used for Coolmax
®
moisture away from the body to the surface
of the fabric where it has the opportunity to
evaporate quickly. At the same time, the uniquely
formed fibres offer maximum breathing activity,
even in wet conditions. In addition, the breathing
activity improves the heat regulating effect.
Ear and forehead pads on this product are
equipped with Coolmax
by INVISTA is a
®
-fabrics transport the
.
®
HeiQ Pure dynamiq
®
PURE Textile freshness
Experience the feeling of
lasting freshness through the
power of silver, keeping you
odour-free all day long.
ADAPTIVE Thermal control
Feel good all over. The textile will cool you down
when you're hot, and keep you dry longer in cold
weather. Cools and minimises perspiration.
The inner lining of the article contains a biocidal
active ingredient (PURE TF by HeiQ
bacterial finish in the inner lining. Active ingredi-
ent: silver adsorbed on silicon dioxide (nano).
High-strength
HCM outer shell
High Density
Copolymer Matrix: High
quality ABS plastic is formed
under extreme heat and
pressure to make a robust and
impact-resistant outer shell.
Visor with
anti-scratch coating
Suitable for eyeglass
wearers
Safety lock closure
Date of manufacture
(month/year):
) as an anti-
®
12/2017
GB 17