F) Measuring Irradiance - Scan Mode - VOLTCRAFT SLX-300 Bedienungsanleitung

f) Measuring irradiance - SCAN mode

Measure the irradiance after placing the sensor in the sun.
5-2 SCAN Mode
Displaying the maximum/minimum and average readings
1
• Press and hold the S/UP button (3) to toggle the readings in row 2 of the LCD display. The MAX, MIN or AVG
symbols will appear on the LCD display together with the corresponding reading.
Maximum/minimum and average values of a reading
2
• Press and hold the S/UP (3) button to switch between the measured maximum, minimum and average values in
the first row of the display.
Freezing/unfreezing a measured value
3
Saving readings (REC)
4
DATA01 ~ DATA20
M
Automatically measuring and recording readings (AUTO REC)
5
In automatic measurement mode, the meter measures 20 sets of data and saves the readings over a preset period.
If the automatic switch-off function is enabled, the meter switches off automatically after the measurements have
been taken.
• The following three readings are displayed in SCAN mode:
• The first row from the top displays the current solar radiation reading.
• The second row displays the measured maximum/minimum values, as
well as the average solar radiation readings. The MAX, MIN or AVG
symbol is displayed accordingly.
• The third row displays the current angle of inclination of the sensor (Q).
• Press the /HOLD button (4) to freeze all readings on the display. The HOLD
symbol (P) will be displayed, and the SCAN symbol (G) will disappear from
the LCD display.
• Press the /HOLD button to unfreeze the display and revert to measure-
ment mode. The SCAN icon will be displayed and the HOLD symbol will
disappear from the LCD display.
• Press the M/DOWN button (2) to save all current readings. The REC symbol
(J) will flash once together with the corresponding number (A).
• Repeat this step for other measurements/readings. You can save up to 20
sets of readings on the 20 memory slots.
23