Preparations; Setting Up - Silvercrest SSSE 300 A1 Bedienungsanleitung

Preparations

Setting up

WARNING – RISK OF INJURY!
► Do not connect the appliance to the mains until it has been completely
assembled!
♦
Clean all parts of the appliance as described in the section Cleaning .
♦
Unwind the cable from around the cable retainer 8 and guide it through the
recess on the edge .
♦
Set up the appliance on a level, dry and non­slip surface .
♦
Place the collector 7 under the opening of the motor unit 6, as shown on
the fold­out page .
♦
Insert a cutting insert 3 4 5 and the feed tube 2 as described in the
section Inserting/changing the cutting insert .
♦
Make sure that the rotary switch 9 is set to position 0 .
♦
Insert the plug into a suitable mains power socket .
The appliance is now ready for use .
■ 38 │ GB │ MT
SSSE 300 A1