Herunterladen Inhalt Inhalt Diese Seite drucken

Bosch GAS 18V-10 L Professional Originalbetriebsanleitung Seite 16

Akku-nass-/trockensauger
Vorschau ausblenden Andere Handbücher für GAS 18V-10 L Professional:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
16 | English
(14) Dust extraction adapter
(15) Curved nozzle
(16) Crevice nozzle
(17) Floor nozzle
(18) Suction tube
(19) Battery bay
A)
(20) Battery
(21) Battery release button
(22) Bracket for suction tube and crevice nozzle
(23) Bracket for vacuum hose and floor nozzle
(24) Fixing bolt for bracket (23)
(25) Snap fastener
(26) False air intake
(27) Filter
(28) Filter holder
(29) Retaining strap of the vacuum hose
A)
(30) Carrying strap
A)
(31) Roller
(32) Roller adapter
(33) Fastening screws
(34) Screen
(35) Bracket for battery compartment cover
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless wet/dry dust extractor
Article number
Voltage
Rated power input
Protection class
Container volume (gross)
Net volume (liquid)
A)
Max. vacuum
B)
– Dust extractor
– Turbine
A)
Max. flow rate
B)
– Dust extractor
– Turbine
Dust class
Weight according to
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
1 609 92A 5KE | (20.04.2020)
Cordless wet/dry dust extractor
Permitted ambient temperature
during operation
storage
Recommended rechargeable
batteries
Recommended chargers
Operating time per battery
charge
A) measured at 20−25 °C with battery GBA 18V 6.3Ah
B) measured with vacuum hose (13) and curved nozzle (15)
C) Depends on battery in use
D) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to
EN 60335-2-69.
Typically the A-weighted sound pressure level of the dust ex-
tractor is 79 dB(A). Uncertainty K = 2 dB. The noise level
when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
determined according to EN 60335-2-69: a
K = 1.5 m/s
Assembly
Charging the Battery
GAS 18V-10 L
Use only the chargers listed in the technical data. Only
u
3 601 JC6 3..
these chargers are matched to the lithium-ion battery of
your dust extractor.
V
18
Note: The battery is supplied partially charged. To ensure
W
260
full battery capacity, fully charge the battery in the charger
IP X4
before using your power tool for the first time.
l
10
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
l
6
does not damage the battery.
The lithium-ion battery is protected against deep discharge
hPa
90
by the "Electronic Cell Protection (ECP)". A protective circuit
hPa
115
switches the cordless dust extractor off when the battery is
drained.
Do not continue to press the on/off button after the
u
l/s
24
dust extractor has automatically switched itself off.
3
m
/h
86
This can damage the battery.
l/s
34
A significantly reduced operating time after charging indic-
3
m
/h
122
ates that the battery has deteriorated and must be replaced.
L
Follow the instructions on correct disposal.
C)
kg
5.1–6.1
Battery charge indicator
°C
0 to +35
The green LEDs on the battery charge indicator indicate the
state of charge of the battery. For safety reasons, it is only
°C
D)
and during
min/Ah
(triax vector sum) and uncertainty K
h
h
2
.
GAS 18V-10 L
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
4
2
 < 2.5 m/s
,
Bosch Power Tools

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis