Inhaltsverzeichnis
Werbung
wasco
®
Important note:
We strongly recommend to consult your network administrator before acti-
vating DHCP. If you want to embed several identical modules of the series
EXDUL-5xx into one network, the presetted hostname of each module
has to be changed. Each hostname within a network must be assigned to
only one device or module. The hostname can be chosen arbitrarily, but
may contain only the ASCII digits 0 through 9 and the letters A through Z
(leave out upper and lower case) and - (hyphen-minus).
4.10 LCD Display during the Booting Process (EXDUL-581E only)
During booting-up the module, the display shows information data. Line 1
indicates the module name, line 2 displays the information that the module
is being initialized. After having completed the boot process, in both cases
the display shows either I/O status information or UserLCD information
depending on your configuration.
EXDUL-581E / EXDUL-581S © 2019 by Messcomp Datentechnik GmbH
EV03
17
Werbung
Inhaltsverzeichnis
