Installing The Batteries - Targus PAWM001E Bedienungsanleitung

Installing the Batteries

1 Remove the battery cover from the top of the mouse by
pressing the battery cover hinge located on the bottom of
the mouse and sliding it off.
2 Insert the supplied batteries, making sure that the positive
(+) and negative (-) ends of each battery match the
polarity indicators inside the battery housing.
WARNINGS: When replacing the batteries, you must use
rechargeable batteries only. Avoid mixing new and used batteries
in a device.
3 Slide the battery cover back into position until it "clicks" firmly
into place.
4 For best results, you should charge the mouse on the charger
base/receiver at least 8 hours before using it.
NOTE: To continuously charge the mouse your computer must be
on and awake. For best results, turn off your computer's power
management feature while charging the mouse.
Targus Wireless Notebook Mouse with Presenter
9