Studer AUTOLOCATOR Bedienungsanleitung Seite 19

STUDER AUTOLOCATOR
2.5
Locate command keys
Key:
tr
Function:
When
the LOC
key is pressed the tape is positioned
at the
tape address
shown
in
the
lowerfield
of
the LOCATE POSITION display.
Example
r
The tape
is
to be positioned
at
31:50 min
Input:
[*ü"-l
tr E
rnput:
EF-"-Etrtr
rnput:
trtrtrtrtr
r
The
tape
is
to be positioned
at
the address stored in memory
7:
When
the
LOC START
key is pressed, the tape is spooled to the address
at
which
the last
PI-AY
or RECORD command was entered (but only while the tape
was standing still!).
Subsequently
the
machine switches
to
PI-AY
or
RECORD,
depending on the
programming.
LOC START is
cancelled by any new function.
When the
ROLLBACK
key
is pressed, the tape is rewound by a programmable
amount. When
the target address is reached, the machine switches
to
STOP,
PISY or RECORD, depending on
the programming.
This function is cancelled by STOP,
PI-AY, PI,AY+REC,
LOC,
<,>,
SHUTTLE
and SHUTTLE BAR.
To modify the rollback time press
STORE,
followed by
ROLLBACK,
and enter
a
time between 01 and
99.
To read out the stored time press RECALL, followed
by
ROLLBACK.
Example
Set
ROLLBACK
time to 20 s
EDlTl0N: 11. November 1991
Et5