Connections And Controls - Lightmaxx Vega BAR RGBW Bedienungsanleitung

Operation:
Start:
Connect the device to the mains and wait a few seconds until it is ready for operation.

Connections and controls:

No. Designation
1 Menu buttons
2 LCD-Display
3 DMX In (3-pol)
4 DMX Out (3-pol)
5 Power Connection (IEC In)
Menu:
Navigation in the menu is via the four menu buttons below the display. Use the "Mode" button to
activate the menu, navigate via the "Up" and "Down" buttons. A corresponding selection is
confirmed with the "Enter" key.
No. Designation
6 Power Output/Link (IEC Out)
ENGLISH