Axis P12 Serie Installationsanleitung Seite 20

AXIS P12 Network Camera Series
Covert Installation
1. Drill a hole with 3mm diameter in the wall or ceiling. If the material is thicker than 1mm
it may be necessary to expand the hole with a countersink cutter.
2. Pull off the protection on the adhesive and attach the straight mounting bracket to
the wall.
3. Insert the camera into the bracket, and fasten with the stop screw. Ensure that the
cone of the camera is flush with the wall.
4. Proceed to Connect the cables, see Connect the Cables on page 24.
20