Insert Driving Batteries; Installing The Transmitter Batteries - Carson X-24 Betriebsanleitung

a. Insert Driving Batteries
1. Open the battery cover.
2. Insert fully charged rechargeable batteries or new AAA/Micro
batteries observing the correct polarity.
3. Close the cover on the battery compartment again. Ensure that
the cover clicks properly into place. Check that it is in its correct
position.
2
b. Installing the Transmitter Batteries
Changing transmitter batteries
* To remove the battery cover, push the cover locking and lift the
cover.
Warning, the batteries may fall out if the cover is not in place. If the
control light is not illuminated, check the contacts, particularly the
1
3
Push and lift
negative (-), and ensure that the batteries are in the correct position.
Only use full batteries. Never mix different batteries / types of battery
or batteries with varying charge levels.
CARSON X-24 15
GB