Bead Breaking - TECO 40 TOP Bedienungsanleitung

The TPMS device (optional accessory) can be used to check the proper opera-
tion of pressure sensor.
Remove the old weights from the rim before starting work operations.

9.3. BEAD BREAKING

Before bead breaking operation, completely close the turntable (locking wedges
towards the centre) (A, Fig.14), keeping your hands away from moving parts.
A
14a
- Press pedal A and bring it into completely lowered con-
figuration. In this configuration, the jaws are completely
closed. (Fig. 14a).
- Remove the internal valve to fully deflate the tyre
(Fig. 14b).
- Adjust the rim rest depending on wheel diameter (Fig.
15a e 15b).
- For extremely wide wheels, position the stop (A, fig.
15d) as shown in figure (fig. 15e).
A
15c
User's manual
WARNING
WARNING
WARNING
14b
A
15d
15a
15b
A
15e
EN
99