Herunterladen Inhalt Inhalt Diese Seite drucken

Tv Aspect; Video Out Signal; Speaker Setting; Display - Samsung HT-D330 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

You can confi gure various display options such as
the TV Aspect, Resolution, etc.

TV Aspect

Depending on the type of television you have, you
may want to adjust the screen setting.
4:3 Pan-Scan
4:3 Letter Box
16:9 Wide
NOTE
If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.
Since DVD discs are recorded in various image formats, they will
look different depending on the software, the type of TV, and the
TV aspect ratio setting.

Video Out Signal

Different countries apply different TV standard.
You can select from NTSC or PAL.
NTSC : You can select the NTSC video format
PAL : You can select the PAL video format

Speaker Setting

Speaker Size
You can set the Speaker Size of the Center and Surround
Speakers, as well as Test Tone in this mode.
HT-D330-XU_ENG-1228.indd 17
HT-D330-XU_ENG-1228.indd 17

Display

Select when you want to see the 16:9
video supplied by the DVD without the
black bars on top and bottom, even
though you have a TV with a 4:3 ratio
screen(extreme left and right portion of
the movie picture will be cut off).
Select when you want to see the total
16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio
screen. Black bars will appear at the
top and bottom of the screen.
You can view the full 16:9 picture on
your widescreen TV.
Audio
Settings
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone
mMove " Select ' Return
For the Front, the mode is set to Small.
For the Subwoofer, the mode is set to Present.
For the Center and Surround, you can switch the
mode to Small or None.
- Small : Select this when using the speakers.
- None : Select this when no speaker is
connected.
NOTE
The speaker mode may vary depending on the
Dolby Pro Logic and Stereo settings.
Sound Edit
You can adjust the balance and level for each speaker.
Settings
Sound Edit
Front Bal.
dB
L
Surround Bal.
dB
L
Center Level
Surround Level
SW Level
<Change " Select ' Return
mMove " Select ' Return
Press the ▲▼ buttons to select and adjust the
desired speaker.
Press the ◄► buttons to adjust the settings.
Adjusting Front/Surround Bal.
You can select between 0 and -6.
The volume decreases as you move closer to –6.
Adjusting Center/Surround/Subwoofer Level
The volume level can be adjusted in steps from
+6dB to –6dB.
The sound gets louder as you move closer to +6dB
and quieter as you get closer to -6dB.
: Off
Select
Return
R
dB
R
dB
dB
dB
dB
17
English
2011-12-28
2011-12-28
12:00:32
12:00:32

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis