Samsung HT-D330 Bedienungsanleitung Seite 13

Choose one of the three methods for connecting to a TV.
Red Blue
COMPONENT OUT
AUX IN AUX IN
DIGITAL DIGITAL
AUDIO IN AUDIO IN
METHOD 1 : Component (Progressive Scan) Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied)
from the COMPONENT OUT (P
jacks on your TV.
METHOD 2 : Scart (Europe only)
If your television is equipped with a SCART input, connect the supplied video cable from the VIDEO OUT jack
on the back of the product to the VIDEO jack on the Scart adapter (Europe only), then connect the SCART
adapter's jack to the SCART IN jack on your television.
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
✎
NOTE

When the Progressive scan mode is selected, the VIDEO output does not feed any signals.

This product operates in Interlace scan mode 480i(576i) for component/composite output.

After making the video connection, set the Video input source on your TV to match the corresponding Video
output mode on your product.
Turn this product on fi rst before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
!
CAUTION

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
HT-D330-XU_ENG-1228.indd 13 HT-D330-XU_ENG-1228.indd 13
Connecting the Video Out to your TV
METHOD 1
Green
FM ANT FM ANT
VIDEO OUT
, P and Y) jacks on the back of the product to the Component Video Input
R B
METHOD 3
(supplied)
METHOD 2
(Europe only)
SCART IN
13
English
2011-12-28 2011-12-28 12:00:27 12:00:27