Cleaning; Technical Information - Exsys EX-6100PoE Anleitung

EX-6100PoE
4. Hardware Installation
3. Now connect the power connector of the optional power supply to the terminal block of
the switch and plug the power plug of the power supply nto an electrical outlet.
4. Now connect your PoE-PD device to the PoE connectors. The yellow PoE Power LED
should light up when the PD is correctly detected and powered by the Ethernet switch.

5. Cleaning

For cleaning please use only a dry fluff less cloth and remove the dirt with gently pres-
sure. In the area of the connectors please make sure that no fibres from the cloth re-
main in the connectors. Attention! Never use a moist or wet cloth for cleaning!

6. Technical Information

Data Transfer Rate:
Connectors:
Hardware System:
Operating System:
Operating Temperature:
Storage Temperature:
Rel. Humidity:
Protection Class:
Power:
Size:
Weight:
© Copyright 2019 by EXSYS Vertriebs GmbH. All Rights Reserved
10/100/1000Mbit/s
1x RJ45 LAN Port, 4x RJ45 PoE Port,
1x +48-57V Terminal Block
Ethernet 10/100/1000Mbit/s
All Operating Systems
-40°F to 185°Fahrenheit
-40°F to 185°Fahrenheit
5% bis 95%
IP30
+48-57 Volt
133,00 x 61,50 x 43,20 mm
300g
11
English