Workshop Repair And Annual Servicing - Sabre ELSA serie Benutzerhandbuch

4. Fold hood into bag and arrange the
breathing hose under the rear of the hood
so that it will not foul when the hood is
pulled from the bag.
5. Fit quick-fire strap to the bag flap.
WARNING:
When fitting the quick-fire strap, check
that it will not foul the air hoses or
wrap round the reducer/cylinder valve
when pulled.
6. Close the bag flap and fit anti-
tamper tags.
4.5 WORKSHOP REPAIR
AND ANNUAL
SERVICING
The apparatus must be returned for
workshop servicing if:
•
The anti-tamper tag is broken.
•
The contents gauge shows less
than full.
•
The apparatus has been used.
•
A scheduled, annual service is due
(please refer to the ELSA Service
Manual).
Apparatus stored in a corrosive, dusty, or
humid environment may require more
frequent servicing.
Training and
Services if you have any service or
operating enquiries.
11
ELSA
Please contact
Technical Support