Operating - Electrolux EEG8000 Gebrauchsanweisung

822 949 425_EEG8000.book Seite 29 Montag, 14. Juli 2008 7:56 19
• If the appliance is used for pur-
poses other than those intended or
used incorrectly, no liability can be
accepted for any damage that may
be caused.
• This appliance is not intended for
use by persons (including chil-
dren) with reduced physical, sen-
sory or mental capabilities or lack
of experience and knowledge
unless they have been given initial
supervision or instruction concern-
ing use of the appliance by a per-
son responsible for their safety.
Child Safety
• Never leave the appliance unat-
tended while in use.
• Keep children away from electrical
appliances.
• Packaging material, e.g. plastic
bags, should not be accessible to
children.
• Children should be supervised to
ensure that they do not play with
the appliance.
Safety in operation
• Check the bean hopper (Fig. 1/B)
for the presence of foreign objects
before using.
• Do not put frozen or caramelised
coffee beans in the bean hopper.
Use only roasted coffee beans!
Remove any foreign objects, such
as small stones, from the coffee
beans. Blocking or damage
caused by foreign objects in the
grinder might be excluded from the
guarantee.
• Always operate the grinder with
the ground coffee container prop-
erly inserted in the grinder.
• Do not place your hand in or near
the burrs while the grinder is in
operation.
• Always place the unit on a flat,
level surface.
• Do not attempt to re-grind ground
coffee.
Safety in cleaning and care
• Follow the cleaning instructions.
• Prior to cleaning, unplug the appli-
ance first!
• Do not immerse the appliance in
water or any other liquid unless
recommended.
• Do not place any parts of the cof-
fee grinder in the dishwasher.

Operating

0 Before using the coffee grinder,
wipe the base exterior with a damp
cloth.
0 Wash the bean hopper (Fig. 1/B),
hopper lid (Fig. 1/A) and ground
coffee container (Fig. 1/P) in warm
soapy water, then rinse and dry.
Do not immerse the burrs in water
1
or any other liquid.
0 Place the coffee grinder on a dry,
level surface.
0 To attach the bean hopper, posi-
tion bean hopper onto the top of
the motor base, push down and
turn clockwise (see Fig. 2).
0 Fill the bean hopper with coffee
beans.
Remember to keep the hopper full
3
at all times. Having an even weight
bearing down on the burrs is
important to ensure a consistent
grind.
This coffee grinder is intended to
3
grind whole coffee beans only.
0 Place the hopper lid onto the bean
hopper.
0 Plug the power cord into a
220-240 V power outlet and switch
the power on.
You can hide unwanted cord in the
3
cord stuff (Fig. 1/L) on the under-
side of the appliance.
0 Select the grind by turning the
grind adjustment collar to the desi-
red setting (see Fig. 3).
g
29