Beijer Electronics E Serie Bedienungsanleitung Seite 85

Technical data for E710
Parameter
Front panel, W x H x D,
Mounting depth
Front panel seal
Rear panel seal
Material in front panel
Reverse side material
Weight, excl. D-sub
Serial port RS422
Serial port RS232C
Expansion slots
Flash memory for
application
Real-time clock
Power consumption at
rated voltage
Display
Active area of display,
WxH
Contrast setting
Power supply
Fuse
Ambient temperature
Storage temperature
Relative humidity
EMC tests on the
terminal
Beijer Electronics AB, MA00614D
211.5 x 198 x 5.7 mm
87 mm excl. D-sub and 110 mm incl. D-sub.
IP 65, NEMA 4X (indoor use only)
IP 20
Autoflex EB A180 or polyester on glass and Autotex F207 *.
1 million operations.
Yellow chrome-plated steel plate.
1.7 kg
25-pin D-sub contact, chassis-mounted female with standard
locking screws 4-40 UNC.
9-pin D-sub contact, chassis-mounted male with standard
locking screws 4-40 UNC.
2
400 KB
±10 PPM + error indication resulting from ambient temperature
and power supply. Total max error indication: 1 min./month =
12 min./year. Battery life for real-time clock: 10 years.
Without load: 300 mA.
Max load with expansion card: 550 mA.
STN-LCD display, 320 x 240 pixels, 256 colors, graphics and text.
CCFL backlight lifetime: 40,000 h at ambient temperature of
+25 °C. Touch screen.
115.2 x 86.4 mm.
Programmable
+24 V DC (20-30 V DC), 3-pin jack connection block. CE: The
power supply must conform with the requirements for SELV or
PELV according to IEC 950 or IEC 742. UL: must conform with
requirements for class 2 power supplies.
1 AT, Littelfuse R452 001 (Nano
mm.
+0 ° to +50 °C
-20 ° to +70 °C
Max 85% non-condensed.
The terminal complies with the requirements in article 4 in the
directive 89/336/EEC. Noise tested according to: EN6100-6-3
emission and EN61000-6-2 immunity.
Technical data
E710
2
SMF Slo-Blo) or 800 mAT, 5 x 20
A-21