Beijer Electronics E Serie Bedienungsanleitung Seite 79

Technical data for E610
Parameter
Front panel, W x H x D
Mounting depth
Front panel seal
Rear panel seal
Keyboard material/
front panel
Reverse side material
Weight, excl. D-sub
Serial port RS422
Serial port RS485
Serial port RS232C
Expansion slots
Flash memory for appli-
cation
Real time clock
Power consumption at
rated voltage
Display
Active area of display,
W x H
Contrast setting
Power supply
Fuse
Ambient temperature
Storage temperature
Beijer Electronics AB, MA00614D
200 x 150 x 5 mm
70 mm with or without D-sub
IP 65, NEMA 4X (Indoor use only)
IP 20
Touch screen: Polyester on glass *, 1 million finger touch opera-
tions. Frame: Autotex F207 *.
Touch protection film: Autoflex EB.*
Yellow-chromated steel plate
1.5 kg
25-pin D-sub contact, chassis-mounted female with standard
locking screws 4-40 UNC.
4-pin jack connection block, chassis-mounted male.
9-pin D-sub contact, chassis-mounted male with standard lock-
ing screws 4-40 UNC.
1
400 kb
±10 PPM + error because of ambient temperature and
supply voltage. Total max error 1 min/month = 12 min/year.
Minimum life of real time clock battery: 10 years.
Without load: 250 mA.
Max load: 400 mA
STN-LCD, 320 x 240 pixels.16 grey scales, graphics and text.
CCFL backlight lifetime at the ambient temperature of +25 °C:
25,000 h. Touch screen.
115.2 x 86.4 mm
Programmable
+24 V DC (20-30 V DC) 3-pin jack connection block.
CE: The power supply must conform with the requirements for
SELV or PELV according to IEC 950 or IEC 742.
UL: The power supply must conform with the requirements for
class II power supplies.
1 AT, Littlefuse R452 001 (Nano
mm
0° to +50 °C
-20° to +70 °C
Technical data
E610
2
SMF Slo-Blo) or 800 mAT, 5 x 20
A-15