Beijer Electronics E Serie Bedienungsanleitung Seite 69

Technical data for E150
Parameter
Front panel, W x H x D
Mounting depth
Front panel seal
Rear panel seal
Keyboard material
Reverse side material
Weight, excl. D-sub
Serial port RS422
Serial port RS232C
Flash memory for appli-
cation
Real time clock
Power consumption at
rated voltage
Display
Active area of display,
W x H
Contrast setting
Power supply
Ambient temperature
Storage temperature
Relative humidity
EMC tests on the
terminal
UL approvals
Beijer Electronics AB, MA00614D
142 x 100 x 3.5 mm
28 mm excl. D-sub and 96.5 mm incl. D-sub
IP 65, NEMA 4X (indoor use only)
IP 20
Membrane switch keyboard with polyester domes.
Overlay film of Autotex F207 * with print on reverse side.
1 million operations.
Alu-Zinc
0.5 kg
25-pin D-sub contact, chassis-mounted female with standard
locking screws 4-40 UNC.
9-pin D-sub contact, chassis-mounted male with standard lock-
ing screws 4-40 UNC.
64 kb
±10 PPM + error because of ambient temperature and supply
voltage. Total max error: 1 min/month = 12 min/year.
Minimum life of the real time clock battery: 10 years.
Max: 200 mA.
STN-LCD. 2 lines of 20 characters, 5 mm character height.
LED backlight lifetime at the ambient temperature of +25 °C:
50,000 h.
73.5 x 11.5 mm
Adjust potentiometer on the back of the terminal using an
appropriate tool, such as a plastic screw driver, in order to limit
the risk of short-circuiting or other injury.
+5 V DC ±5 % from controller system or externally.
Battery eliminator (connector 2.1 mm, center pin 0 V).
0 ° to +50 °C
-20 ° to +70 °C
Max. 85 % non-condensed
The terminal conforms with the essential protection require-
ments in article 4 of the directive 89/336/EEC. Noise tested
according to EN50081-1 emission and EN61000-6-2 immunity.
UL 508, UL 1604 (Class I, Div 2, Groups A, B, C, D, T4)
Technical data
E150
A-5