Beijer Electronics E Serie Bedienungsanleitung Seite 71

Technical data for E200
Parameter
Front panel, W x H x D
Mounting depth
Front panel seal
Rear panel seal
Keyboard material
Reverse side material
Weight excl. D-sub
Serial port RS485
Serial port RS422
Serial port RS232C
Flash memory for appli-
cation
Real time clock
Power consumption at
rated voltage
Display
Active area of display,
W x H
Contrast setting
Power supply
Beijer Electronics AB, MA00614D
E200
147 x 163.5 x 5 mm
38 mm excl. D-sub 107 mm
incl. D-sub
IP 65, NEMA 4X (indoor use only)
IP 20
Membrane switch keyboard with polyester domes.
Overlay film of Autotex F207 * with print on reverse side.
1 million operations.
Alu-Zinc
0.7 kg
-
25-pin D-sub contact, chassis-mounted female with standard
locking screws 4-40 UNC.
9-pin D-sub contact, chassis-mounted male with standard lock-
ing screws 4-40 UNC.
64 kb
±10 PPM + error because of ambient temperature and supply
voltage. Total max error 1 min/month = 12 min/year.
Minimum life of real time clock battery: 10 years.
Max: 150 mA
STN-LCD. 4 lines of 20 characters, 5 mm character height.
LED backlight lifetime at the ambient temperature of +25 °C:
50,000 h.
70.4 x 20.8 mm
Adjust potentiometer on the back of the terminal using an
appropriate tool, such as a plastic screw driver, in order to limit
the risk of short-circuiting or other injury.
+24 V DC (20-30 V DC) 3-pin jack connection block.
CE: The power supply must conform with the requirements for
SELV or PELV according to IEC 950 or IEC 742. UL: The power
supply must conform with the requirements for class II power
supplies.
Technical data
E200 of hardware version
type no 04765 or higher
41 mm excl. D-sub 107 mm
incl. D-sub
Available through RS422.
Requires software configura-
tion
A-7