Technical Data - Beijer Electronics E Serie Bedienungsanleitung

Technical data

Technical data for E50
Parameter
Front panel, W x H x D
Mounting depth
Front panel seal
Rear panel seal
Keyboard material
Reverse side material
Weight, excl. D-sub
Serial port RS422
Serial port RS232C
Flash memory for appli-
cation
Power consumption at
rated voltage
Display
Active area of display,
W x H
Contrast setting
Power supply
Ambient temperature
Storage temperature
Relative humidity
EMC tests on the
terminal
UL approvals
Beijer Electronics AB, MA00614D
104 x 69 x 3.5 mm
39 mm with or without D-sub
IP 65, NEMA 4X (indoor use only)
IP 20
Membrane switch keyboard with polyester domes. Overlay film
of Autotex F207 * with print on reverse side. 1 million opera-
tions.
Alu-Zinc
0.2 kg
25-pin D-sub contact, chassis-mounted female with
standard locking screws 4-40 UNC.
A RS232C port is available when the enclosed adapter 232-25-
ADP is mounted on the RS422 port.
16 kb
Max: 200 mA
STN-LCD. 2 lines of 16 characters, 5 mm character height.
LED backlight lifetime at the ambient temperature of +25 °C:
50,000 h.
55.7 x 11.0 mm
Adjust potentiometer on the back of the terminal using an
appropriate tool, such as a plastic screw driver, in order to limit
the risk of short-circuiting or other injury.
+5 V DC ±5 % from controller system or externally.
Battery eliminator (connector 2.1 mm, center pin 0 V).
0 ° to + 50 °C
-20 ° to +70 °C
Max. 85 % non-condensed
The terminal conforms with the essential protection require-
ments in article 4 of the directive 89/336/EEC. Noise tested
according to EN50081-1 emission and EN61000-6-2 immunity.
UL 508, UL 1604 (Class I, Div 2, Groups A, B, C, D, T4)
Technical data
E50
A-1