Beijer Electronics E Serie Bedienungsanleitung Seite 75

Technical data for E410
Parameter
Front panel, W x H x D
Mounting depth
Front panel seal
Rear panel seal
Keyboard material/Front
panel
Reverse side material
Weight excl. D-sub
Serial port RS422
Serial port RS232C
Serial port RS485
Built-in Ethernet
Flash memory for appli-
cation
Real time clock
Power consumption at
rated voltage
Display
Active area of display,
W x H
Contrast setting
Power supply
Fuse
Ambient temperature
Storage temperature
Relative humidity
Beijer Electronics AB, MA00614D
142 x 90 x 47.5 mm
43.5
IP 65, NEMA 4X (indoor use only)
IP 20
Touch screen: Polyester on glass *, 1 million finger touch opera-
tions. Frame: Autotex F207 *.
Touch protection film: Autoflex EB.*
Alu-Zink
0.4 kg
25-pin D-sub contact.
9-pin D-sub contact.
Available through RS422 with software settings.
RJ45 connector, 10/100 Mbit/s
400 kb
±10 PPM + error because of ambient temperature and supply
voltage. Total max error 1 min/month = 12 min/year.
Minimum life of real time clock battery: 10 years.
Max 150 mA
FSTN-LCD, 320 x 240 pixels, monochrome, graphic and text. LED
backlight lifetime at the ambient temperature of +25 °C: 50,000
h. Dimming of backlight 1-100%.
76.8 x 57.6mm
Adjust potentiometer on the back of the terminal using an
appropriate tool, such as a plastic screw driver, in order to limit
the risk of short-circuiting or other injury.
+24 V DC (20-30 V DC) 3-pin jack connection block.
CE: The power supply must conform with the requirements for
SELV or PELV according to IEC 950 or IEC 742. UL: The power sup-
ply must conform with the requirements for class II power sup-
plies.
800 mAT, 5 x 20 mm
0 ° to +50 °C
-20 ° to +70 °C
5-85 % non-condensed.
Technical data
E410
A-11