Cancel Program; Program End; Breaks In Operation; Switching Off - ACKERMANN BlueBee Serie Originalbetriebsanleitung

e. Cancel program
A running program can be cancelled at any time by pressing the program start button (3). The
"END" message will appear in the display panel.
f. Program end
Once the program has finished, the "END" message appears in the display panel and all LEDs in
the status and progress indicator bar (5) light up. The door/hood can now be opened and the
basket can be removed.
g. Breaks in operation
When there is a short break in operation, do not open the appliance. Close the door so that no
heat can escape.
Caution: When the hood is open on pass-through dishwashers, press and hold down the program
start button (3) for 4 seconds until the automatic start indicator (6) goes out. Then close the
hood. A program will not be started. Start the next program manually by pressing the program
start button (3). The automatic hood start function will then be activated again.
h. Switching off
Switch off the dishwasher at the end of the working day with the help of the drain program ABP
(see Chapter 8.b.ff.) so that it is drained every day.
Caution: If you only use the ON/OFF button, the tank will remain full but the water will not stay
at the right temperature. If the temperature in the tank drops too low, the dishwasher will be
drained and refilled automatically.
Note: The appliance has a safety function which protects against overheating. If the dishwasher
remains switched on for a longer period of time with the door/hood open, the safety function
will be triggered. The dishwasher then switches off autonomously.
7