Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8 . F U N C T I O N A N D O P E R AT I O N
b. Wash programs
Press the select program button (2) to display the program which is activated. Press the select
program button (2) again to change the program. The programs listed below are available for
selection. The programs marked with * are available as an option only or not at all depending on
the dishwasher model. To activate optional programs, please contact your service partner.
P1 Short wash program
Duration approx. 70-80 seconds. For slightly soiled items.
P2 Standard wash program
Duration approx. 120 seconds. For normally soiled items.
P3 Intensive wash program *
Duration approx. 150-180 seconds. For heavily soiled items.
GRU Basic cleaning program
Duration approx. 300-600 seconds. At a higher temperature and dosage as well as with an in-
creased water consumption. For the basic cleaning of items with heavy soiling.
ABP Drain program
Duration approx. 30-60 seconds. Program for drainage and switch-off (without self-cleaning).
The machine pumps out the tank water. Once complete, the dishwasher will switch off.
c. Start program (on appliances with door)
Close the door and press the program start button (3). The program is started. In the progress
indicator bar (5), the LEDs flash progressively from top to bottom. Do not open the door when
the program is running.
d. Start program (on appliances with hood)
Pass-through dishwashers have the automatic start function activated in the factory. This means
that the program will start automatically when the hood is closed. In the progress indicator bar
(5), the LEDs flash progressively from top to bottom. Do not open the hood when the program
is running.
caution:
The automatic hood start function is not active the first time you start the dishwas-
her. For this reason, press the program start button (3) to start the program. The automatic
hood start function will then be activated.
6
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
