Resetting To Delivery Status; Pc Mode; Selecting Inputs - THOMSON 15LB020S4 Bedienungsanleitung

Resetting to delivery status

Open the Reset menu:
1. Press MENU button.
2. Select Reset in the Main menu using arrow
buttons Ÿ / ⁄.
Press arrow button ÿ to move the green marker to the Re-
3.
set menu.

PC mode

Selecting inputs

A PC can be connected to the device via VGA socket (B), or a
PC or another digital signal source can be connected via DVI
socket (C) (see section Connecting auxiliary equipment on
page 25).
1. The VGA input is selected via a selection menu. This ap-
pears on the screen if you press the AV button.
Select PC or DVI by pressing the arrow buttons Ÿ / ⁄.
2.
3. Press the OK button to store the setting.
A window with the settings for the screen resolution (PC), hori-
zontal deflection frequency (HFREQ) and vertical deflection fre-
quency (VFREQ) appears for a few seconds.
4. If you press OK button twice, theTV settings are restored
to the factory settings, i.e. all channels, the personalised
picture and sound settings, the dollar sign markings, the se-
curity code for the childproof lock and the timer settings are
erased.The message Please wait appears during this
process. The message Reset completed then appears
on the screen.
5. Quit the menu by pressing the EXIT button.
6. Disconnect the unit from the mains by unplugging it.
7. Reconnect the unit to the mains. When the unit is switched
on again using the mains switch (1) or the
remote control, the initial start-up procedure appears on the
screen (see page 13).
Note:
It is impossible to reset the TV to its original delivery
status if the childproof lock is activated.
Setting the language and adjusting screen settings
1. Open the Picture menu: Press MENU button.
Use arrow buttons Ÿ / ⁄ to select the individual menu
2.
items.
/ ÿ to modify the relevant data.
3. Use arrow buttons
Pressing OK button saves all the changes to the picture
format.
Press the EXIT button to quit the menu.
Note:
The television is compatible with Microsoft and Apple
operating systems.
Operation
button on the
En
21