Equalizer Function - Makita DMR203 Betriebsanleitung

Disconnecting the multiple speakers
● To disconnect only one secondary speaker, press
and hold the Plus button of the secondary speaker
you want to disconnect.
● To disconnect all connections and exit the multiple
speakers group, press and hold the Plus button of the
master speaker.

Equalizer function

1. Press the Power button to switch on your speaker.
2. Press the EQ control button to select your required
mode (FLAT/JAZZ/ROCK/CLASSIC/POP/NEWS).
3. To set up the bass, middle and treble, press the EQ
control button until "Bass" flashes on the display.
4. Press the Volume up/down button to select your
required bass level. Press the EQ control button
to confirm the setting and enter the "Mid." (Middle)
setting.
5. Press the Volume up/down button to select your
required middle level. Press the EQ control button
to confirm the setting and enter the "Tre." (Treble)
setting.
6. Press the Volume up/down button to select your
required treble level. Press the EQ control button to
confirm the setting.
Playing music via auxiliary
input socket
A 3.5mm Auxiliary input socket is provided on the right
side of the unit to permit an audio signal to be fed into
the unit from any devices that features a headphone or
audio output, such as MP3 or CD player.
1. Connect a stereo or mono audio source (for example,
MP3 or CD player) to the Auxiliary input socket
(marked 'AUX IN'), the speaker will be switched from
Bluetooth to auxiliary input mode.
2. Adjust the Volume control on your MP3 or CD player
to ensure an adequate signal and then adjust the
volume on the speaker for comfortable listening.
Note:
To have the better sound quality, we recommend setting
the volume to more than two-thirds level on your audio
device and then adjust the volume on the speaker as
required.
The display does not show the information such as title,
artist, album, etc., when playing via auxiliary input socket.
MAINTENANCE
CAUTION:
● Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
● Do not wash the speaker with water.
SPECIFICATIONS
Amplifier
Output power
Frequency response
Aux In
Input sensitivity
Speaker
Main speaker
Tweeter speaker
®
Bluetooth
(The Bluetooth
trademarks owned by Bluetooth SIG, Inc.)
Bluetooth version
Bluetooth Profiles
Transmission Power
Transmission Range
Supported codec
Compatible Bluetooth
profile
Maximum speaker-
frequency power
Operating Frequency
USB charging socket
Maximum supplying
power of USB socket
General
AC power adaptor
Battery
Dimensions(W x H x D) 206mm × 199mm × 217mm
Weight
The company reserves the rights to amend the
specification withour notice.
11 ENGLISH
10.8V-12Vmax: 3.5W
14.4V: 6W
18V: 10W
50Hz~20kHz
250mVrms @100Hz
101.6mm 8ohm 10W
36mm 8ohm 10W
®
word mark and logos are registered
5.0 Certified
A2DP/SCMS-T/AVRCP
Power Class2
Optimum:
Max.10 meters (33 feet)
Possible:
Max.30 meters (100 feet)
(varies according to usage
conditions)
SBC
A2DP/AVRCP
BT EDR: 3.08dBm
BT LE: 3.88dBm
2402MHz~2480MHz
5V, 2.1A
DC in 12V 1.5A, center pin
positive
Slide battery:
10.8V-12Vmax
14.4V
18V
2.7KG (without battery)