Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Maintenance - Makita PC1100 Bedienungsanleitung

Betonhobel
Vorschau ausblenden Andere Handbücher für PC1100:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25

OPERATION

Planing in corners
Fig.10
Flush planing of corners is possible after first removing
the dust cover.
Turn dust cover clockwise until it stops, light toward you
to remove.
Fig.11

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
Replacing carbon brushes
Fig.12
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
Fig.13
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
ACCESSORIES
CAUTION:
These
accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Offset diamond wheel (Dry type)
Elbow joint 32
or
attachments
Only use
accessory or
are
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis