Windows Installation - M-Audio Revolution 5.1 Quickstart-Anleitung

Introduction
This guide is intended to help get you started quickly. In order to achieve optimal usage of
your new soundcard, we recommend that you carefully study the full manual on the
E
enclosed CD-ROM, before or after completing the process described in this guide.
N
G

Windows Installation

L
Note: You must have Direct X 9.0b installed in your system before installing the
I
Revolution 5.1 software. For your convenience, Direct X 9.0b is included on the
S
enclosed CD-ROM.
H
Running the Installer
Start your computer. Insert the M-AUDIO DRIVERS CD-ROM and wait a moment until it
displays the InstallShield Wizard. Follow the instructions to install the driver properly.
Installing the Card
Shut your computer down, unplug it from its power source, and insert the Revolution 5.1
PCI card into an available PCI slot. For specific instructions on how to do this, please refer
to the Revolution 5.1 Manual's "Hardware Setup" section. Restart the computer. When the
machine finishes rebooting, a "Found New Hardware Wizard" will appear with the
recommended hardware driver settings already selected. Press "Next" and follow the
onscreen prompts to complete the driver installation.
Connecting the Speakers
The Revolution 5.1 facilitates a variety of configurations ranging from two to six speakers.
Connect the Left, Right, Center, Subwoofer, Left Surround, and Right Surround speakers to
the jacks on the Revolution 5.1. Please refer to the manual for assistance with identifying
the specific output jacks.
Testing the Installation
Play a DVD or other surround-enabled media to enjoy your new surround system. Open the
Revolution 5.1 Control Panel to adjust the speaker settings. If your current DVD player cannot
decode a Dolby Digital surround sound signal, install WinDVD 5 from the included CD-ROM.
Mac OS 9.2.2 Installation
Installing the Card
Shut your computer down, unplug it from its power source, and insert the Revolution 5.1 PCI
card into an available PCI slot. For more detailed instructions on how to do this, please refer
to the Revolution 5.1 Manual's "Hardware Setup" section. Restart the computer.
Running the Installer
Insert the Revolution CD-ROM into your Macintosh CD-ROM drive and double-click the
Revolution CD icon that will appear on your desktop. In the Revolution CD-ROM window,
double-click the "Mac OS 9.2.2" folder. Then, double-click the "Revo 5.1 Installer"
application icon and follow the instructions on each screen.
4