Replacing The Interior Light Bulb - Beko LBI 3002 Handbuch

Replacing the interior light
bulb
Should the light fail to work switch
off at the socket outlet and pull out
the mains plug. Follow the below
instructions to check if the light bulb
has worked itself loose.
If the light still fails to work obtain
a replacement E14 screw cap type
15 Watt (Max) bulb from your local
electrical store and then fit it as follows:
1. Switch off at the socket outlet
and pull out the mains plug. You may
find it useful to remove shelves for
easy access.
2. Remove the light diffuser cover
as shown in figure (a-b).
3. Replace the burnt-out light bulb.
4. Reassemble the light diffuser
cover as shown in figure (c)."Push
firmly to ensure cover is fitted
properly."
5. Carefully dispose of the burnt-
out light bulb immediately.
"Replacement light bulb can easily be
obtained from a good local electrical or
DIY store."
14
EN