Using The Remote Control - Interlogix UltraView Serie Benutzerhandbuch

Menu options
Pixel Saver Mode
Recall

Using the remote control

1. Power Switch: Press to switch monitor on / off.
2. Source: Select input source - VGA, DVI, BNC1, BNC2, Y/C, Y
Cb Cr.
3. Menu/Exit: Recall or close OSD display, enter or return selection.
4. Up: Scroll up the OSD options.
5. Down: Scroll down the OSD options.
6. Left: Press to decrease the value of OSD option selected.
7. Right: Press to increase the value of OSD option selected.
14 • EN
Description
This is an active method to help stave off screen burn by
rotating the image slightly every 12 hours.
Press (+) or (-) recall the default value.
UltraView Color TFT LCD monitor 26 in./ 32 in./ 42 in.