Connections; Front Panel Controls; Control Panel (Tvm-1700/Tvm-1900 Model) - Interlogix TVM-1700 Benutzerhandbuch

Disassembling the monitor
1. Put a smooth pad or cloth on a level surface.
Place the monitor on it facing downwards.
2. Using a screwdriver or a similar object with a
sharp end, carefully detach the supporting arm
from the foot by pressing the groove on the
back of the supporting arm. (Note that the
fixation point can be broken if too much force is
applied).
TVM-1700/TVM-1900 models
TVM-2200 model

Connections

1. DC 12V Input
2. VIDEO OUT Composite signal output
3. VIDEO IN
Composite signal input.
4. AUDIO L
Audio signal input left.
5. AUDIO R
Audio signal input right.
6. PC Stereo Input
7. Head Phone Out
8. HDMI
HDMI signal input.
User Manual
9. VGA
RGB signal input.

Front panel controls

Control panel (TVM-1700/TVM-1900
models)
1 POWER Indicator
Shows both normal operation and power
management status with power LED.
2 POWER
Switches the monitor on and off.

3 Right Arrow - Volume (*)
Selects menu.
Primary Function: Used to increase the volume.
Secondary Function: Moves cursor to the right
in the OSD (On-Screen Display) window and
increases the value of any selected menu.

4 Left Arrow - Volume (*) Selects menu
Primary Function: Used to decrease the
volume.
Secondary Function: Moves cursor to the left in
the OSD window and decreases the value of
any selected menu.
5 MENU
Turns the OSD window on. Turns the OSD
window off and moves from sub menu to top
menu in the OSD window.

6 Up Arrow - Auto Adjustment (*)
Primary Function: Automatically adjusts the
display to the most optimal setting
possible.(VGA mode only)
Secondary Function: Allows for vertical scrolling
in the OSD menu and to increase the value of
the selected menu function.

7 Down Arrow
Allows for vertical scrolling in the OSD menu,
and to decrease the value of the selected
submenu function.
8 SOURCE (*)
Used to select from different input sources.
3 EN