Interlogix UltraView Serie Benutzerhandbuch Seite 20

1.
VIDEO In / Out (2) (BNC-TYPE) : Connect to the output / input terminal of
video equipment, such as a VCR or a color video camera.
2. VIDEO In / Out (1) (BNC-TYPE) : Connect to the output / input terminal of
video equipment, such as a VCR or a color video camera.
3.
Y/C In / Out (4-Pin mini-Din) : Connect to the Y/C output / input terminal of
camera VCR or other video equipment.
4. Audio In / Out (RCA Jack) : Audio input / output terminal for BNC1.
5.
Audio In / Out (RCA Jack) : Audio input / output terminal for BNC2.
Note: It takes about 4 to 5 seconds to change mode. When the mode is changed,
the monitor shows a blue screen then enters signal input, or shows the message
"No Signal".
CAUTION: AVOID directly pulling any cables when disconnecting
devices from the monitor. Always disconnect devices carefully by
firmly gripping the metal or plastic connector body and gently easing
the connector from its socket.
16 • EN UltraView Color TFT LCD monitor 26 in./ 32 in./ 42 in.