Battery Instructions; Connecting A Video Signal To The Monitor - Interlogix UltraView Serie Benutzerhandbuch

8. PIP: Press to select PIP function OSD menu.
9. Mute: Press to mute/unmute.

Battery instructions

The remote control provided with the product comes with one lithium
battery. To remove this battery, detach the control's back cover, replace it
with another battery, and reattach the cover. For proper recycling, dispose
of all batteries as required by local ordinances or regulations.

Connecting a video signal to the monitor

Figure 3. Input/Output interface
1.
VGA / DVI Audio Line In: Audio source with YPBPr.
2. YPBPr / LR In (RCA jack): Connect to the I/O terminal of video equipment
such as a DVD.
3.
VGA In: Connect to an analog RGB output terminal such as the display card
output VGA terminal of the personal computer.
4. HDMI: Option.
5.
DVI In: Connect to an analog RGB output terminal such as the display card
output DVI terminal of the personal computer..
6.
DC out for camera: Connect 12 VDC out for single camera power (max.
500mA).
7. AC IN connector: Connect the AC power cord to the AC input connector and
wall socket.
UltraView Color TFT LCD monitor 26 in./ 32 in./ 42 in. 15 • EN