Interlogix UltraView Serie Benutzerhandbuch Seite 17

13
14
* Color Temp depends on the region.
# 26 in. monitor sharpness default value is 19".
Table 2. Description of VIDEO options
Menu options
Brightness
Contrast
Tint
Color
Color Temp.
Sharpness
Scan
H-Position
V-Position
Volume
PIP/POP
Sub Source
Size
PIP H-Pos
PIP V-Pos
Swap
Language
UltraView Color TFT LCD monitor 26 in./ 32 in./ 42 in.
Pixel Saver Mode
Recall
Description
Adjusts background black level of the screen image (range
0 to 100).
Adjusts foreground white level of the screen image (range
0 to 100).
Adjusts the color tint. (NTSC only) (range 0 to 100)
Adjusts the color density (range 0 to 100).
Press (+) or (-) to choose three types of color temperature
9300°K, 6500°K , Standard.
Adjusts the clarity and focus of the screen image (range 0
to 100).
Press (+) or (-) to choose four type of over scan or under
scan or full scan or 1 : 1 scan.
Adjusts the up or down position of the screen image (range
0 to 100).
Adjusts the left or right position of the screen image (range
0 to 100).
Adjusts the volume control.
View the video input screen image on the left-top screen.
Press (+) or (-) to choose three types of PIP : VGA, DVI,
Off.
Select the source of the sub picture.
Select the size of the sub picture
Adjust the left or right position of the sub picture.
Adjust the up or down position of the sub picture.
Swap the picture in picture.
Selects the language of the OSD text: English, Chinese,
French, German, Spanish, Italian or Japanese.
On
13 • EN