Cleaning And Maintenance - Teesa TSA3511 Bedienungsanleitung

16
3. Plug the device into power mains socket.
Note: In case of using blender or whisk, insert the attachment into a container with food to
be processed. In case of chopper, the food needs to be inserted into the bowl after the blades
are assembled and before the lid and motor unit are mounted.
4. Set the adjustable speed knob to desired setting and press adjustable speed mode
button OR press Turbo mode button to start operation.
Note: user can freely change settings of the adjustable speed knob during operation when
using adjustable speed mode button (top button).
5. Use the blender no longer than 1 minute at a time. If within that period, the desired
effect has not been reached, stop operation and wait for about 1 minute before using
the device again.
Note: please regard 1 minute of operation and 1 minute of rest as a one operation cycle.
After continuous operating the device for 5 cycles (that is 1 min. operation followed by 1
minute rest, 5 times in a row), the blender must be left for cooling for about 30 minutes.
6. Unplug the device from power supply mains after operation.
Notes on usage:
• Don't use the appliance when not immersed into food / when the chopper bowl is empty.
• Do not overfill chopper bowl or beaker. Maximum ingredients volume for chopper is
500 ml and for beaker 600 ml.
• To avoid splashing, turn on the device only after the blender/whisk has been inserted
into food to be processed.
• Short-time operating: Use the appliance for no longer than 1 minute at a time; after that
let the device cool down for at least 1 minute. Please regard 1 minute of operation and
1 minute of rest as a one operation cycle. After continuous operating the device of 5
cycles (that is 1 min. operation followed by 1 minute rest, 5 times in a row), the blender
must be left for cooling for about 30 minutes.
• Don't operate hard food for longer than 10 seconds at once.
• Do not use the appliance for dry grinding hard food like soybean, rice and frozen meat,
ice cubes, nutmeg, coffee beans, grains etc., nor for succulent liquid food processing.
Don't operate food without water!
EN
• Food preparation before processing with the blender or chopper: cut the food into cubic
blocks no bigger than 1,5x1,5 cm, and add some liquid (e.g. water, milk, etc.).
• Before processing food, make sure it's pitted, peeled, cutted if necessary etc.
• Don't place the device into hot ingredients / don't place hot ingredients into the chopper
or beaker. Hot ingredients should be cooled down prior to processing by this appliance.
(Max. ingredient temperature is 60°C).
• Always disconnect the device from mains supply before cleaning or storing.
• Motor unit should be cleaned only with soft, slightly damp cloth. Never immerse motor
unit into water or any other liquid.
• After processing very salty food, it is suggested to rise the blades right away.

CLEANING AND MAINTENANCE

Owner's manual