sylvac S_Dial WORK Bedienungsanleitung Seite 6

1 . Operating features of the instrument
E
- The instrument has two operating modes: basic functions (direct access) and advanced functions. In addition to
MODE
the configuration functions, available access to the MIN, MAX and DELTA (TIR) mode, or display of tolerances
(see chaps. 3 and 4)
- The «favourite» key gives direct access to the function used most often (see chap. 9)
- Sets a Preset value, reset the MIN/MAX mode, verifies a selection, and controls switching off the instrument.
SET
By default, SIS mode enables automatic switch-off with no loss of origin (see chap. 11).
- With the «Left and Right» buttons, the user may change the extent of the analogue scale as well as enter the
values of the nominal dimension and tolerance limits. (see chap. 6.2)
- Personalising the functions
It is possible to activate or de-activate certain functions of the instrument via RS232 (see chap. 13)
- Data transmission parameters
4800Bds, 7 bits, even parity, 2 stop bits
2. Start
Press a button. When used for the first time, the instrument requests selection of the measurement unit
required (MM or Inch). Choose..... then measure.
6