sylvac S_Dial WORK Bedienungsanleitung Seite 13

8. Scale the analog display
The user may change the analogue display's scale value by shortly pressing
8.1 Centring function of the analogue scale
When the tolerance limits are asymmetric with respect to the nominal ratings, it is possible to realign them to the analogue
scale, by a short simultaneous press on
+ 0.025
Example : 12.000
+ 0.020
Asymmetric tolerance limits
and
+0.020 +0.025
mm
TOL
µm
or
+0.020
+
TOL
µm
Realigned tolerance limits
13
.
+0.025
mm
E